Rex 30G Racing Service Fluoro Grip wax +1...-8°C, 45g

A new fluorinated grip wax for new snow.

Use as the final grip wax layer on top of harder grip waxes (e.g. blue) when it's snowing.Around 0°C good on its own or combined with klister.

Tips to get the best performance with the new Racing Service -line 30G Grip wax:

Zero degrees, falling snow:

Apply 190 Base wax

Apply 3-6 layers of 120 Light Blue -1…-4°C kickwax depending on the ski flex. Smooth with synthetic cork between layers

Apply a layer of 30G kickwax Smooth the kickwax with thumb or synthetic cork

When the basic kickwaxing is made with harder blue wax coated with soft and fast gripping 30G. You get fast kickwaxing with a solid grip. The hard layers of blue prevent snow crystals from penetrating too deep in to the wax and thin layer of 30G gives you the solid kick needed.

Minus degrees, new snow:

Apply 190 Base wax

Apply 3-6 layers of 15 ProGrip Blue -2…-8°C kickwax depending on the ski flex. Smooth with synthetic cork between layers

Apply a layer of 30G kickwax Smooth the kickwax with thumb or synthetic cork

The idea is similar to zero degrees -waxing. Hard base prevents the snow chrystals from penetrating the wax and relatively soft coating of 30G gives you the grip needed.

Wet conditions:

Spread the 290 Base klister evenly with a heat gun and synthetic cork

Apply a layer of 240 Universal klister with a heat gun and synthetic cork

Mix 30G grip wax with Universal Klister. This can be done by crayoning the 30g on top of Universal klister and then mixing them together with thumb.

This is a basic waxing where kick wax is mixed with klister and it can be done also with different klisters. The idea is to mix some harder kickwax with soft klister to prevent icing of possible new snow and loose snow from the track.